Programming Tutorial

Wednesday, 19 June 2019

Getting started with Arduino

›
Hi everyone, I would like to share the tutorial for the Arduino UNO. Arduino UNO is a microcontroller based on the Atmega328p. It equipped w...
2 comments:
Sunday, 16 November 2014

Raspberry Pi with DS18B20 temperature sensor (part 1)

›
1. Hardware needed in this tutorial:-      a) raspberry pi,      b) DS18B20 sensor,      c) 4.7k Ohm resistor      d) some wires      e...
2 comments:

Connect raspberry pi to a password protected AP (WPA2)

›
1. This tutorial use TL-WN725n wifi dongle attach with raspberry pi. Follow this link for driver installation. 2. Attach the TL-WN725n wif...
1 comment:
Tuesday, 4 November 2014

Installing Avahi (Zeroconf) for raspberry pi

›
If raspberry pi get an IP from the DHCP server at the home modem/router, the IP address may change after we reboot the router or raspberry p...
Wednesday, 24 September 2014

Installing Open-WRT in TP-Link MR3020

›
1. Connect Ethernet cable form TL-MR3020 to the computer. Your computer will get an IP in 192.168.0.0 subnet. 2. Download the Open-WRT f...
5 comments:
Tuesday, 16 September 2014

16x2 LCD Hello World (using C + WiringPi)

›
Thanks to WiringPi who made the GPIO porting become simple. This entry will show the "hello world" LCD tutorial in C using Wiring...
13 comments:
Wednesday, 10 September 2014

Raspberry Pi GPIO - LED on/off (wiring Pi + php)

›
This entry is the third entry for the GPIO on Raspberry pi. Assuming readers already installed the wiringPi, just follow the below step to m...
64 comments:
›
Home
View web version

About Me

My photo
kurup_87
As a programmer, sometimes we know the theory but cannot put it into practice because we do not know where to start. This blog written by a newbie programmer who thought learning by example is the best way to learn. Thank you for reading this blog :)
View my complete profile
Powered by Blogger.